It is very important that you maintain a productive fleet, specifically crawler excavators, to ensure that you stay on target during busy seasons. The best way to go about it is to train your operators on the proper operation of the excavator undercarriage and teach them a couple of tips and tricks for the maintenance, usually outlined in the operations manual by the manufacturer. By reviewing the following maintenance best practices and tips, you can get the most out of your undercarriage parts australia in terms of performance and machine part life. Let’s start looking at some of the most commonly used maintenance tips and tricks and bring your fleet up to the mark.
Daily Inspection
Your equipment operators should perform daily inspection of every machine’s undercarriage, and look for uneven wear and tear, damage, missing components. Check for proper clearance between the idler roller and track chain, also, make sure to check the trackpads and drive sprockets for any damage or wear. These issues can point you towards bigger problems and avoid any potential damage. You shouldn’t overlook any of them.
Track Alignment
Appropriate alignment of the tracks is very important to prevent any unnecessary wear of the components. Improper alignment can adversely affect components, more so than any other issue. Idler flanges, track links, carrier and track roller flanges, rock and sprockets guards can all suffer a great deal from the resulting increased wear when the tracks on your machine are improperly aligned.
Track Tension
One of the most important things you need to check is the track tension when the machine is underutilization. You should daily check for track tension and make adjustments to ensure proper operations of the machine. If your environment changes during the day, make sure to check for tension after the machine settles into the new environment. With regular use, machines will gather more stuff on the undercarriage parts and affect the tension leading to issues.
Benchmarks
Being the owner of the equipment, you can cut down on the maintenance costs by keeping a track of where the product is in the life cycle of their undercarriage. Set benchmarks and to measure the state of the undercarriage, it will help establish patterns and allow you to predict issues at times even before they happen.
Make a Schedule and Stick To It
If you want to effectively cut down on the maintenance cost of your equipment, you should conduct inspections in line with the best practice recommendations made by the manufacturer. You should conduct these inspections more frequently if the operational conditions are demanding. Stick to the schedule you make and make sure to cover everything from checks on undercarriage bolt torques to oil changes.
